How to Replace the UV LED of SICUBE projectors by hand easily?
Replace the UV LED SOP
1. Remove 4 *M 3 screws 4 -M3
![](https://cdn.shopifycdn.net/s/files/1/0618/9557/3744/files/1_a873e3bf-4974-47e0-b668-37ce21320f30_480x480.png?v=1660619994)
2. Remove mainboard 2-FAN 1
![](https://cdn.shopifycdn.net/s/files/1/0618/9557/3744/files/2_4ffcd5c2-a761-4ecc-84ed-163f902b2ebf_480x480.png?v=1660620038)
3. Remove 2 fans
![](https://cdn.shopifycdn.net/s/files/1/0618/9557/3744/files/3_62932728-7cd4-45ee-9d94-553097b308a5_480x480.png?v=1660620083)
4. Remove 2 *M 2 screwS He at-sinking 2-M 2 2
![](https://cdn.shopifycdn.net/s/files/1/0618/9557/3744/files/4_480x480.png?v=1660620114)
5. Remove the L ED heat-sinking , then replace the UV LED
![](https://cdn.shopifycdn.net/s/files/1/0618/9557/3744/files/5_480x480.png?v=1660620154)
6. Re-assemble again according to the 5 steps