Skip to product information
1 of 3

SICUBE

20MP resolution DIY camera, IMX283 4K camera module with wide angle lens

20MP resolution DIY camera, IMX283 4K camera module with wide angle lens

Regular price $470.00
Regular price $627.00 Sale price $470.00
Sale Sold out
Taxes included. Shipping calculated at checkout.

Descrition:

This DIY camera is equipped with the iCatch Vi37M chip, which supports up to 4K@60FPS (interpolated), 4K@30FPS, 2.7K@60FPS, and 1080P@120FPS H.264 encoded video. The camera module uses Sony's IMX283 one-inch CMOS Sensor, with an effective pixel of 20 million, and is paired with a 7G2P high-quality lens with a field of view of 102°.

The board supports USB Type-C interface, HDMI high-definition interface, TF card slot (up to 512G TF memory card), battery interface, 2 control buttons, digital silicon microphone, buzzer, and can expand network port, wifi, display, serial port, DC DC power supply, ADC five-way button, PWM and other interfaces. The size of the PCB board is 38*38mm, the height of the whole set of camera modules is 48mm, and the weight is 50g.

DIY camera (camera motherboard + IMX283 camera module) combination solution, widely used in USB camera, HDMI camera, aerial camera, action camera, industrial camera, wearable camera, work recorder and other video camera products.

Specifications

Master Control Chip (DSP) :iCatch Vi37M

Lens Model :HX1117C Lens
Image sensor :SONY IMX283(20MP) Sensor type CMOS
Sensor interface :MIPI battery voltage 7.7V high voltage lithium battery
Effective pixels: 20 million pixels, image plane size: 1" (one inch)
Storage type: External TF card, support 8G~512G class 10 and above cards, U3 Type-C interface Type-C USB 5V is recommended; U disk mode connected to computer; Connect to PC PCCAM (webcam) mode
Pixel size 2.4*2.4um EIS image stabilization is not supported, can be customized
Operating temperature: -10-+60°C, storage temperature: -20-+80°C
Humidity20%-80%

 PCB size 38*38mm
Expansion Interfaces: Network port, Wifi, display, Uart*3 serial port, DC power supply, ADC five-way button, PWM, etc
Video resolution    
4K@48/50/60fps (interpolation)

4K@24/25/30fps

2.7K@24/25/30/48/50/60fps

1080P@24/25/30/48/50/60/120fps
720P@24/25/30/48/50/60/120/240fps
Photo resolution    
20M(5200x3900)
13M(4160x3120)

12M(4000x3000)

10M(3648x2736)

8M(3264x2448)

5M(2592x1944)

3M(2048x1536)

2M(1920x1080)

Focal length 6.6mm lens TTL total length 30.22mm
APERTURE (F/NO.)
2.8 Material Construction 7G2P
Diagonal FOV(D) 102° Horizontal FOV(H) 91.8°
Relative Illumination 32.8%

Hardware interface

20 million camera modules

IMX283 L1117C Camera Module:

It can shoot 20 million pixel high-definition photos and record 4K@30FPS videos.

USB Type-C port:

This interface supports a USB standard 5V power input to power the camera module and can also charge the battery. The USB interface can be connected to the computer to directly read the files in the TF card, which can be used as a USB flash drive, and can also be used as a PCCAM USB camera. On the USB interface, one camera control serial port UART3 and one camera debugging serial port UART1 are retained (the serial port function can be used with a dedicated G1-USB serial port adapter board).

Micro HDMI Interface:

It adopts Micro HDMI interface output, which can support up to 4K@30FPS video signal output.

20 million camera modules

Battery Interface:

Battery-powered battery, the battery voltage is between 6.6V (low-power shutdown) ~ 8.8V, and it is recommended to use 7.4~7.7V high-voltage high-density lithium battery. (Note: It can support up to 12V access, and cannot be charged using the USB port when connected to a non-7.7V battery power supply)

Two buttons:

They are the power button (A button), the confirmation button (B button), the power button controls the power on/off and switch modes, and the confirmation button controls the photo and video recording.


 

View full details